Product ID:INDUSTRIAL HEAT RESISTANT ALUMINUM, 206-145
MSDS Date:12/16/1987
FSC:8010
NIIN:00N017870
MSDS Number: BLXQD

CORONADO PAINT CO

308 OLD COUNTY RD
EDGEWATER, FL 32032-1812
US

Emergency Phone: 904-428-6461

Info Phone: 904-428-6461

Cage: 33200

CORONADO PAINT COMPANY, INC.

EDGEWATER, FL 32132-1812 US

Telephone: 904-428-6461

Cage: 33200

ALUMINUM

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 21.1%

OSHA PEL 15 MG(AL)/M3 (DUST)

ACGIH TLV: 10 MG(AL)/M3 (TDUST)

SILICONE/ALKYD

Fraction By Weight: 22.9%

ALIPHATIC NAPHTHA

Fraction By Weight: 55.3%

ACGIH TLV: 275 PPM (MFR)

DRIERS

Fraction By Weight: 0.7%

MFR RECOMMENDS MIXTURE TLV OF 550 PPM.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:DRY SKIN. EYE IRRITAITON. EXCESSIVE
INHALATION MAY CAUSE HEADACHE, DIZZINESS, NAUSEA.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL: REMOVE TO FRESH AIR, CALL MD IF NEEDED. SKIN: WASH
WITH MILD SOAP & WATER; APPLY SKIN CREAM. IN SEVERE CASES, CALL MD.
EYES FLUSH WITH WATER FOR AT LEAST 15 MINUTES, CALL MD. INGEST:
CALL MD.

Flash Point Method:SCC
Flash Point:80.0F,26.7C
Lower Limits:1.1%
Upper Limits:6.0%
Extinguishing Media:FOAM, CO*2, DRY CHEMCIAL
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WATER MAY BE UNSUITABLE EXCEPT AS A
COOLING MEDIUM.

Spill Release Procedures:FLUSH WITH WATER INTO RETAINING AREA OR
CONTAINER. AVOID SPARKS, FIRE, OR HOT METAL SURFACES. SMALL SPILLS
MAY BE ABSORBED ONTO APPROPRIATE ABSORBANT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP COOL, DRY AND AWAY FROM SOURCES
OF IGNITION. USE WITH ADEQUATE VENTILATION. AVOID
PROLONGED/REPEATED PERSON CONTACT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:ABOVE TIME WEIGHTED TLV, USE NIOSH/MSHA APPROVED
CARTRIDGE RESPIRATOR OR GAS MASK.
Ventilation:LOCAL EXHAUST TO KEEP WORKROOM BELOW TLV.
Protective Gloves:IMPERMIABLE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:APRON, BARRIER CREAM.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:F4
Boiling Pt:B.P. Text:250F,121C
Vapor Pres:2 @ 68F
Vapor Density:4.1
Spec Gravity:1.008
Evaporation Rate & Reference:1 (BUTYL ACETATE = 1)
Solubility in Water:NONE
Appearance and Odor:BRIGHT SILVERY, METALLIC LIQUID; MILD SOLVENT ODOR
Percent Volatiles by Volume:69.5

Stability Indicator/Materials to Avoid:YES
DO NOT ALLOW WATER TO GET INTO LIQUID DURING STORAGE.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES.
Hazardous Decomposition Products:THERMAL DECOMP MAY YIELD CARBON
MONOXIDE.

Waste Disposal Methods:INCINERATE UNDER SAFE CONDITIONS OR DISPOSE OF
ACCORDING TO APPLICABLE STATE, LOCAL AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.